Rotary unscrambler
1260 P

neck-handling
pneumatic
conveyor
For containers from 0.1 L to 2 L
Rotary unscrambler
1260 p
Outfeed on neck-handling pneumatic conveyor
For containers from 0.1 L to 2 L
The machine is designed for the unscrambling of empty plastic containers variously sized and shaped (bottles, flacons, etc.), loaded in bulk into the feed hopper. The containers exit the machine in vertical position standing on their bases and are then collected by an air conveyor that supports them by the neck.
Hourly output table with dedicated format
Electric power 0.18 kW
Air consumption at 6 bar 480÷640 L/min
Weight 600 kg
Highlights
- Partial changeover: it is obtained by means of inserts to be applied on a basic equipment Watch the video »
- Total changeover: it is carried out by replacing the whole equipment. The number of channels can vary depending on the bottle size to be handled. Watch the video »
- Automatic ejector for stuck containers on the outfeed pneumatic neck-handling conveyor (for containers arriving already misshapen to the unscrambler)
Operating Principle
The upper part of the unscrambler machine consists of a feed hopper receiving the containers from an elevator which measures out their quantity using photoelectric sensors. The hopper bottom is composed of a cone whereon the containers glide towards peripheral selectors which are mounted on a rotating carousel supported and driven by the main gearmotor unit. An inverter is employed for the unscrambler motorization, thus enabling an accurate speed regulation whilst ensuring soft starts and stops, for the benefit of transmission components lifetime and as a guarantee of a higher reliability. Once containers are inside selectors they fall upright into vertical channels that accompany them to the outfeed area and transfer them to a “neck-handling” air conveyor. The air conveyor feeding device is adjustable in height, so it allows to carry out changeover operations very quickly, without replacing any parts and without needing to regulate the height of the outfeed air conveyor itself. In order to feed the line smoothly and continuously, the unscrambler can run at a basic speed (corresponding to the nominal output) and at a “slowdown” speed, that can be set by the operator panel: the change from one speed to the other takes place automatically and it is controlled by photocells checking the accumulation state on downstream conveyors.
The unscrambler functionality is highlighted by its changeover system, which is extremely fast, obtained by applying inserts on the selectors or the vertical channels: these operations are easy and quick thanks to the fast-locking devices employed. When the containers to be handled are very different in size from one another it is possible to increase the number of channels (more channels for smaller sizes), considerably raising the hourly output to match filler requests. On the other hand, it will always be possible to handle a bigger container than the “maximum initial size” by using a dedicated equipment composed of less channels to match the consequent lower hourly output requested by the filler. Adjustment interventions are easily understood and simple to carry out thanks to visualisation instruments showing the set up values and to colour-coded changeparts specific for each bottle format.


