Rotary unscrambler
2800 dp

neck-handling
pneumatic
conveyor
For containers from 0.1 L to 1 L
Rotary unscrambler
2800 dp
Outfeed on neck-handling pneumatic conveyor
For containers from 0.1 L to 1 L
The machine is designed for the unscrambling of empty plastic containers variously sized and shaped (bottles, flacons, tanks, etc.), loaded in bulk into the feed hopper. The containers exit the machine in vertical position standing on their bases and are then collected by an air conveyor that supports them by the neck.
Hourly output table with dedicated format
Electric power 2.42 kW
Air consumption at 6 bar 810÷1130 L/min
Weight 3500 kg
Highlights
- Partial changeover: it is obtained by means of inserts to be applied on a basic equipment. Watch the video »
- Automatic ejector for stuck containers on the outfeed pneumatic neck-handling conveyor (for containers arriving already misshapen to the unscrambler).
Operating Principle of the 2800 DP Rotary Unscrambler
The loading of the rotary unscrambler, with “two discharging points” in this case, is carried out by a distributing conveyor placed above the feed hopper, which is divided into two sectors; the containers are measured out and sent, from time to time, to the hopper emptier sector according to the signals coming from photoelectric sensors. The hopper bottom is composed of a cone whereon the containers glide towards peripheral selectors which are mounted on a rotating carousel; to improve this distribution and increase selectors collecting capacity the cone and carousel rotate in opposite directions. Once containers are inside selectors they fall upright into lower channels mounted on a second carousel rotating at a different speed: this special solution allows each selector to unscramble two containers for each machine turn, considerably increasing the hourly output. An inverter is employed for the unscrambler motorization, thus enabling an accurate speed regulation whilst ensuring soft starts and stops, for the benefit of transmission components lifetime and as a guarantee of a higher reliability. The lower channels accompany the containers to the outfeed area and transfer them to a belt device feeding a “neck-handling” air conveyor. This device, with independent motorization, synchronizes the belts speed with the channels one, allowing an exact insertion of the containers into the neck guides and guaranteeing the regular working of the conveying system.
The belts device motor is “electric axis” type and it enables to adjust the belts speed specifically for each bottle size, thus ensuring an optimum working even when the containers are very different in size and shape from one another. Moreover, the possibility to adjust the belts both in height and width allows to carry out changeover operations very quickly, without replacing any parts and without needing to regulate the height of the outfeed air conveyor. In order to feed the line smoothly and continuously, the unscrambler can run at a basic speed (corresponding to the nominal output) and at a “slowdown” speed, that can be set by the operator panel: the change from one speed to the other takes place automatically and it is controlled by photocells checking the accumulation state on downstream conveyors. The unscrambler functionality is highlighted by its changeover system, which is extremely fast, obtained by applying inserts on the selectors or on the vertical channels: these operations are easy and quick thanks to the fast-locking devices employed. Adjustment interventions are easily understood and simple to carry out thanks to visualisation instruments showing the set up values and to colour-coded changeparts specific for each bottle format.


